AJPS Shifter Rebuild Kit W58

Technical information

• Bushes are Toyota genuine, except bronze bush for selector which is unavailable from Toyota and has been remanufactured in Australia

Blurb

• Direct replacement for your factory parts design to improve feel and reduce play in the shifter
• Bronze bush is press fit

Extra Details

• Use with all W series boxes (celica or supra type)

Fitting Instructions

a) Put bush in the freezer the night before, (in bag supplyed)..

1. Remove gear stick
2. Drain oil
3. Remove box from car
4. Remove 6 x selector housing bolts
5. Remove shifter housing
6. Remove the rubber part & 6 x spacers
7. Knock old bush out
8. Tip box up & wash out gunk with degreaser
9. Get frozen bush from the freezer (Do not touch it with your hands, as it will warm it up, keep it in the freezer bag)
10. Fit to selector arm, using a "G" clamp, or a hammer (Not recommended) & block of wood.. (if using the hammer/wood thing you must support the selector)
11. NOTE:- it is Best to strip the gear box, remove the selector arm, & Press the bush in.....
12. Once bush is seated, wash it out again with degreaser
13. Refit the selector housing & then box to car.. fill with oil...
14. Fit New gear stick bushes from packet
15. Fit gear stick to box
16. Go for a drive.

Customer Reviews

“I don’t miss gears any more, 2nd to 3rd change feels awesome now!”

Options

Individual – Green/black - $25, white cup bush - $15, bronze selector bush - $39

Shifter gasket – add $8 (must specify which box type)